<h1>Raymond Mill Tend To Be Green-Oriented</h1>
With unceasing progress of mill technical level, the fineness material can
reach becomes smaller and smaller, and the corresponding application field
becomes more and more widely. At the same time, as the promotion of health
consciousness, people ask for more in market building decoration materials and
decorative supplies, for example: paint, pigment, fly ash, cement, calcium
carbonate powder, artificial stone, barite, whose processing are closely linked
with ball mill; but defects like low efficiency, large energy consumption, large
dust of ball mill has gradually become a huge resistance for industry
development -- in this case, mill machinery products with high performance and
low pollution become the urgent needs of milling industry.
In view of
environmental protection and energy saving products, Hongxing mechanics think
that slag processing and steel processing equipment will be two big potential
markets in the future. Slag is the inevitable product of blast-furnace-iron
making and blast-furnace- steelmaking process. Now the slag utilization rate is
about 10% as refining 1 tons of steel produces 12% ~ 14% of the steel slag so
that most of metal and slag are wasted. Therefore, the diamond slag crushing and
grinding equipment have good development prospect, which will directly promote
the slag resources recycling. Secondly, iron and steel scrap is the only one
that can substitute for raw iron ore materials. China's current scrap recycling
rate is 19.9%, which is far below the world average of 48.3%. Foreign scrap
processing industry rely on scrap breaking and sorting processing as a leader,
research and develop a new technology which integrating high-tech of
environmental protection, mechanical and electrical to make it a new economic
growth point.
Hongxing brand Raymond mill can be widely used in high fine
milling processing of more than 280 kinds of materials like barite, calcite,
talc, feldspar, marble, limestone, dolomite, fluorite, lime, activated carbon,
activated clay, bentonite, kaolin, cement, phosphate rock, gypsum, glass,
insulation materials, etc. whose Mohs hardness is below 9.3 and humidity below
6% in non flammable mineral, chemical, construction and other industries. R type
Raymond mill can freely adjusts granularity between 80 – 325mm, part of the
material can be up to 600mm.